PE 1/2 | 1/2 Union Tee Push to Connect Fitting
1/2" O.D tube push to connect fitting allows connect and disconnect 1/2" O.D tubes easily and quickly without causing damage to 1/2" O.D tubes. 1/2" O.D tube union tee push to connect fitting is used to connect three 1/2" O.D tubes at both 90° angles.
Product Specifications
| Applicable Tubing O.D.: | 1/2" |
| Fluid Admitted: | Air, Vacuum, Water (no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC Teflon Tubing ... |
Dimensions of PE 1/2 | 1/2 Union Tee Push to Connect Fitting
| Part No. | Applicable Tubing ΦD | ØP | B | L | E | N | ØK | O1 | O2 | C |
| PE 1/2 | 1/2" | 21 | 59 | 22.8 | 29.5 | 27 | 4.2 | 23 | 20.5 | 19.8 |
* Information contained herein may be changed without prior notification. Please contact us for confirming accurate dimensions.
Category: PE Union Tee Push to Connect Fittings