PEG 06-04 | 6mm to 4mm Push to Connect Fitting - Union Tee Reducer
6mm - 4mm union tee reducer push to connect fitting is used to connect three tubes with size down in both 90 degree directions. Tubing O.D in middle is 4mm and another two inline tubings are 6mm.
Product Specifications
| Applicable Tubing O.D.1: | 6mm |
| Applicable Tubing O.D.2: | 4mm |
| Fluid Admitted: | Air, Vacuum, Water (no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC Teflon Tubing ... |
Dimensions of PEG 06-04 | 6mm to 4mm Push to Connect Fitting - Union Tee Reducer
| Part No. | Applicable Tubing O.D.1 | Applicable Tubing O.D.2 |
| PEG 06-04 | 6mm | 4mm |
* Information contained herein may be changed without prior notification. Please contact us for confirming accurate dimensions.