PEG 08-04 | 8mm to 4mm Union Tee Reducer Push to Connect Fitting
8mm - 4mm union tee reducer push to connect fitting is used to connect three tubes with size down in both 90 degree directions. Tubing O.D in middle is 4mm and another two inline tubings are 8mm.
Product Specifications
| Applicable Tubing O.D.1: | 8mm |
| Applicable Tubing O.D.2: | 4mm |
| Fluid Admitted: | Air, Vacuum, Water (no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC Teflon Tubing ... |
Dimensions of PEG 08-04 | 8mm to 4mm Union Tee Reducer Push to Connect Fitting
| Part No. | Applicable Tubing O.D.1 | Applicable Tubing O.D.2 |
| PEG 08-04 | 8mm | 4mm |
* Information contained herein may be changed without prior notification. Please contact us for confirming accurate dimensions.