PEG 1/4-1/8 | 1/4 to 1/8 Tube Union Tee Reducer Push to Connect Fitting
1/4" O.D to 1/8" O.D tube union tee reducer push to connect fitting is used to connect three tubes with size down in both 90 degree directions. Tubing O.D in middle is 1/8 and another two inline tubings are 1/4.
Product Specifications
| Applicable Tubing O.D.1: | 1/4" |
| Applicable Tubing O.D.2: | 1/8" |
| Fluid Admitted: | Air, Vacuum, Water (no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC Teflon Tubing ... |
Dimensions of PEG 1/4-1/8 | 1/4 to 1/8 Tube Union Tee Reducer Push to Connect Fitting
| Part No. | Applicable Tubing O.D.1 | Applicable Tubing O.D.2 |
| PEG 1/4-1/8 | 1/4" | 1/8" |
* Information contained herein may be changed without prior notification. Please contact us for confirming accurate dimensions.