PEG 12-10 | 12mm to 10mm Union Tee Reducer Push to Connect Fitting
12mm - 10mm union tee reducer push to connect fitting is used to connect three tubes with size down in both 90 degree directions. Tubing O.D in middle is 10mm and another two inline tubings are 12mm.
Product Specifications
| Applicable Tubing O.D.1: | 12mm |
| Applicable Tubing O.D.2: | 10mm |
| Fluid Admitted: | Air, Vacuum, Water (no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC Teflon Tubing ... |
Dimensions of PEG 12-10 | 12mm to 10mm Union Tee Reducer Push to Connect Fitting
| Part No. | Applicable Tubing O.D.1 | Applicable Tubing O.D.2 |
| PEG 12-10 | 12mm | 10mm |
* Information contained herein may be changed without prior notification. Please contact us for confirming accurate dimensions.