Pneuflex has official distributors in 30+ countries
Distributor Login
PG 1/2-3/8 | 1/2 - 3/8 Union Straight Reducer | Push to Connect Fitting
1/2 to 3/8 inch union straight reducer push to connect fitting is used for connecting two different plastic tubes straightly in compressed air circuits. One tubing connection size is 1/2" and another tubing connection size is 3/8". To connect, simply push the tubing until it bottoms and stainless steel teeth to grip onto the tubing and hold it captive. To release the tubing, press the release sleeve on the fitting and you can easily pull the tube out.
| Applicable Tubing O.D.1: | 1/2" |
| Applicable Tubing O.D.2: | 5/16" |
| Fluid Admitted: | Air, Vaccum, Water(no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | 0∼60°C | 32∼140°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC |
- Technical Data
- Downloads
Dimensions of PG 1/2-3/8 | 1/2 - 3/8 Union Straight Reducer | Push to Connect Fitting
| Part No. | Applicable Tubing O.D.1 | Applicable Tubing O.D.2 | ØP1 | ØP2 | B | L1 | L2 | O1 | O2 | C |
| PG 1/2-3/8 | 1/2" | 5/16" | 21 | 19 | 47.3 | 22.8 | 22.3 | 23 / 19.5 | 20.5 / 17 | 19.8 / 16.8 |
* Information contained herein may be changed without prior notification. Please contact us for confirming accurate dimensions.
How to connect and disconnect PG 1/2-3/8 | 1/2 - 3/8 Union Straight Reducer | Push to Connect Fitting
