PK 1/8 | 1/8 Union Branch Push to Connect Fitting
1/8" O.D tube union branch push to connect fitting is used to connect two 1/8" O.D tubing connections on both ends in straight line and three 1/8" O.D tubing on the branch with same diameter at right angles. 1/8" O.D tubing x 1/8" O.D tubing union branch push to connect fitting is made of strong thermoplastic (PBT) and stainless steel tube gripping claw. 1/8" O.D tubing union branch connector push to connect fitting is the most intuitive way of connecting tubes to a fitting in order to create a fluid distribution network.




Product Specifications
Applicable Tubing O.D.: | 1/8" |
Fluid Admitted: | Air, Vaccum, Water(no freezing) |
Body Material: | PBT Plastic |
Seal Material: | NBR |
Working Pressure: | 0∼1.0MPa | 0∼150psi |
Proof Pressure: | 3.0Mpa | 435psi |
Negative Pressure: | -100Kpa | -29.5 In Hg |
Working Temperature: | -20∼80°C | -4∼176°F |
Lock Claw: | Stainless Steel (SUS) |
Applicable Tube: | PU / PA / PE / PVC |
Category: PK Union Branch Push to Connect Fitting