Pneuflex has official distributors in 30+ countries
Distributor Login
PM Bulkhead Union | Push to Connect Fitting
Applicable Tubing: Metric Tubing and Inch Tubing
Bulkhead union push to connect fitting is used to connect two tubes on both ends through a panel in straight line and can easily change the tubing connector direction, provides optimum sealing between the fitting and the panel. Bulkhead union push to connect fitting is made of nickel plated brass, stainless steel, POM, and other materials that resist corrosion and wear. Push-to-connect fittings allow a quicker method of connection when compared to compression fitting or hose barb and clamp connections. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 12 mm, inch tubing O.D ranging from 1/8" to 1/2".
| Fluid Admitted: | Air, Vaccum, Water(no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC |
Products of PM Bulkhead Union Push to Connect Fitting
