PVG Union Elbow Reducer | Push to Connect Fitting
Applicable Tubing: Metric Tubing and Inch Tubing
Union elbow reducer push to connect fitting is used to connect two tubes with different tubing diameter on both ends at a 90° angle, can be used to change direction of tubing easily. Union elbow reducer pneumatic push-to-connect fitting bodies are made of strong thermoplastic (PBT) and have stainless steel tube gripping claws. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 12 mm, inch tubing O.D ranging from 1/8" to 1/2".
Construction | Specifications of PVG Union Elbow Reducer - Push to Connect Fitting
Product Specifications
| Fluid Admitted: | Air, Vaccum, Water(no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC |
Products of PVG Union Elbow Reducer Push to Connect Fitting
Total 9 products
Optional Release Sleeve for PVG Union Elbow Reducer - Push to Connect Fitting
