PW Union Y Reducer | Push to Connect Fitting
Applicable Tubing: Metric Tubing and Inch Tubing
Union Y reducer push to connect fitting is used to connect one tube on one side to two tubes on another side for branching air distribution in same direction. The tubing size in the middle is smaller than the other two. Union Y reducer pneumatic push-to-connect fitting bodies are made of strong thermoplastic (PBT) and have stainless steel tube gripping claws. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 12 mm, inch tubing O.D ranging from 1/8" to 1/2".
Construction | Specifications of PW Union Y Reducer - Push to Connect Fitting
Product Specifications
| Fluid Admitted: | Air, Vaccum, Water(no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC |
Products of PW Union Y Reducer Push to Connect Fitting
Total 2 products
Optional Release Sleeve for PW Union Y Reducer - Push to Connect Fitting
