PZA Union Cross | Push to Connect Fitting
Applicable Tubing: Metric Tubing and Inch Tubing

Union cross push to connect fitting is used to connect together four tubes in all 90° directions. All tubing connections are of the same diameter. Union cross pneumatic push-to-connect fitting bodies are made of strong thermoplastic (PBT) and have stainless steel tube gripping claws. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 12 mm, inch tubing O.D ranging from 1/8" to 1/2".
Construction | Specifications of PZA Union Cross - Push to Connect Fitting
Product Specifications
Fluid Admitted: | Air, Vaccum, Water(no freezing) |
Body Material: | PBT Plastic |
Seal Material: | NBR |
Working Pressure: | 0∼1.0MPa | 0∼150psi |
Proof Pressure: | 3.0Mpa | 435psi |
Negative Pressure: | -100Kpa | -29.5 In Hg |
Working Temperature: | -20∼80°C | -4∼176°F |
Lock Claw: | Stainless Steel (SUS) |
Applicable Tube: | PU / PA / PE / PVC |
Products of PZA Union Cross Push to Connect Fitting
Total 5 products
Optional Release Sleeve for PZA Union Cross - Push to Connect Fitting

