PEG Union Tee Reducer | Push to Connect Fitting
Union tee reducer push to connect fitting is used to connect three tubes with size down in both 90 degree directions. The tubing size in the middle is smaller than the two inline tubes. Accommodate metric tubing O.D ranging from 4mm to 16mm, inch tubing O.D ranging from 1/8" to 1/2".
Construction | Specifications of PEG Union Tee Reducer - Push to Connect Fitting
Product Specifications
| Fluid Admitted: | Air, Vaccum, Water(no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC |
Products of PEG Union Tee Reducer Push to Connect Fitting
Total 19 products
Optional Release Sleeve for PEG Union Tee Reducer - Push to Connect Fitting
