Pneuflex has official distributors in 30+ countries
Distributor Login
PKG Union Branch Reducer | Push to Connect Fitting
Applicable Tubing: Metric Tubing and Inch Tubing
Union branch reducer push to connect fitting is used for in-line distribution of air to three smaller diameter tubing connections at a right angle to the supply line. Union branch reducer pneumatic push to connect fitting is made of strong thermoplastic (PBT) and has stainless steel tube gripping claw. Union branch reducer push to connect fitting is push-to-connect quick connect and quick release. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 12 mm, inch tubing O.D ranging from 1/8" to 1/2".
Construction | Specifications of PKG Union Branch Reducer - Push to Connect Fitting
Product Specifications
| Fluid Admitted: | Air, Vaccum, Water(no freezing) |
| Body Material: | PBT Plastic |
| Seal Material: | NBR |
| Working Pressure: | 0∼1.0MPa | 0∼150psi |
| Proof Pressure: | 3.0Mpa | 435psi |
| Negative Pressure: | -100Kpa | -29.5 In Hg |
| Working Temperature: | -20∼80°C | -4∼176°F |
| Lock Claw: | Stainless Steel (SUS) |
| Applicable Tube: | PU / PA / PE / PVC... |
Products of PKG Union Branch Reducer Push to Connect Fitting
Total 8 products
Optional Release Sleeve for PKG Union Branch Reducer - Push to Connect Fitting
