PV Union Elbow | Push to Connect Fitting

Union elbow push to connect fitting is used to connect two tubes with equal tubing diameter on both ends at a right angle, can be used to change direction of tubing easily. Simple installation -- push the tubing in, and the connection is complete. To release the tubing, press the release sleeve on the fitting, and you can easily pull the tube out. Accommodate metric tubing O.D ranging from 4 mm to 16 mm, inch tubing O.D ranging from 1/8" to 1/2".

Construction | Specifications of PV Union Elbow - Push to Connect Fitting

Product Specifications

Fluid Admitted:	Air, Vaccum, Water(no freezing)
Body Material:	PBT Plastic
Seal Material:	NBR
Working Pressure:	0∼1.0MPa \| 0∼150psi
Proof Pressure:	3.0Mpa \| 435psi
Negative Pressure:	-100Kpa \| -29.5 In Hg
Working Temperature:	-20∼80°C \| -4∼176°F
Lock Claw:	Stainless Steel (SUS)
Applicable Tube:	PU / PA / PE / PVC