PE Union Tee | Push to Connect Fitting

Union Tee is a kind of most generally used push to connect fitting. Union Tee push to connect fitting is used to connect three tubes of equal diameter at both 90° angles. Union tee push-to-connect fitting body is made from strong thermoplastic (PBT). Accommodates metric tubing O.D ranging from 4mm to 16mm, inch tubing O.D ranging from 1/8" to 5/8". Release collar and Lock-claw built in the union tee push to connect fitting allows easy connection and disconnection of tubing without causing damage totube.
Union Tee push to connect fitting could accommodate polyurethane tube, nylon tube, polyethylene tube and PVC Tube etc. Push to connect fittings are ideal for general pneumatic industrial applications.

Fluid Admitted: | Air, Vaccum, Water(no freezing) |
Body Material: | PBT Plastic |
Seal Material: | NBR |
Working Pressure: | 0∼1.0MPa | 0∼150psi |
Proof Pressure: | 3.0Mpa | 435psi |
Negative Pressure: | -100Kpa | -29.5 In Hg |
Working Temperature: | -20∼80°C | -4∼176°F |
Lock Claw: | Stainless Steel (SUS) |
Applicable Tube: | PU / PA / PE / PVC |
Products of PE Union Tee Push to Connect Fitting

